86-576-82698897
Haichang Road 1188#, Binhai Industrial Zone, Taizhou, Zhejiang, China
| General | 1 | Model | FD30 | |||
| 2 | Power Type | Diesel | ||||
| 3 | Rated Capacity | kg | 3000 | |||
| 4 | Load Centre | mm | 500 | |||
| Characteristic& Dimension | 5 | Lift Height | mm | 3000 | ||
| 6 | Free lift height | mm | 125 | |||
| 7 | Fork Size | L× W× T | mm | 1070× 125× 45 | ||
| 8 | Mast Tilt Angle | F/R | Deg | 6° /12° | ||
| 9 | Front Overhang (Wheel center to fork face) | mm | 487 | |||
| 10 | Rear overhang | mm | 448 | |||
| 11 | Ground Clearance Bottom of mast |
mm | 140 | |||
| 12 | Overall Dimension | Length to face of fork(Without fork) | mm | 2670 | ||
| 13 | Overall Width | mm | 1225 | |||
| 14 | Mast Lowered Height | mm | 2065 | |||
| 15 | Mast Extended Height(With backrest) | mm | 4150 | |||
| 16 | Overhead Guard Height | mm | 2090 | |||
| 17 | Turning Radius (outside) | mm | 2415 | |||
| 18 | Min. right angle asisle width | mm | 2120 | |||
| Performance | 19 | Speed | Travel (No load) | km/h | 19 | |
| 20 | Lifting (Full load) | mm/s | 500 | |||
| 21 | Lowering(Full load) | mm/s | 400 | |||
| 22 | Max. Drawbar Pull(Full load) | kn | 13 | |||
| 23 | Max. Gradeability (No load/Full load) | % | 20 | |||
| Chassis | 24 | Tire | Front | mm | 28× 9-15-12PR | |
| 25 | Rear | mm | 6.50-10-10PR | |||
| 26 | Tread | Front | mm | 1000 | ||
| 27 | Rear | mm | 980 | |||
| 28 | Wheelbase | mm | 1700 | |||
| 29 | Service weight | kg | 4390 | |||
| Power& Transmission | 30 | Battery | Voltage/Capacity | V/Ah | 12/90 | |
| 31 | Engine | Model | C240 PKJ | |||
| 32 | Manufacture | ISUZU | ||||
| 33 | Rated output/r. p. m. | kw | 34.5/2500 | |||
| 34 | Rated torque/r. p. m. | N@ m | 139/1800 | |||
| 35 | No. of Cylinder | 4 | ||||
| 36 | Bore× Stroke | mm | 86× 102 | |||
| 37 | Displacement | cc | 2369 | |||
| 38 | Fuel Tank Capacity | L | 70 | |||
| 39 | Transmission | Type | Powershift | |||
| 40 | Stage | FWD/RVS | 1/1 |
